Motor Motion Control Module 5 Digit Screen Stepper Motor Motion Controller For CNC

Motor Motion Control Module 5 Digit Screen Stepper Motor Motion Controller for CNC Specification: Item Type: Stepper Motor Motion Controller Case SizeLxWxH: Approx. 99.7 x 72 x 17mm / 3.93 x 2.83 x 0.67in Screen Structure: 5 digit high light digital tube Operating Environment: -5 degrees Celsius -60 degrees Celsius no condensation Output: Output 2. Output Voltage: 0V Operating Voltage: DC DC12-24V >1A power supply Opening SizeLxW: Approx. 92 x 69.8mm / 3.62 x 2.75in Motor Pulse Voltage: Collector 24V can be directly connected to 5-24V driver Motor Pulse Frequency: 85K HZ Input: Enter 7. The input takes 0V as the valid signal [F] Function Summary: In the actual work the parameters internal parameters of the system that do not need to be modified often are focused on this. Serial NumberFunctionwith x is not recommended to adjustRangeDefault valueF1Molecular electronic gear ratio see below for details on the specific algorithm0-655358F2Denominator electronic gear ratio see below for details on the specific algorithm0-655355F3x Minimum speed the minimum speed limit at which the motor is allowed to operate Unit: Class0-655350F4x Maximum speed the maximum speed limit at which the motor is allowed to operate Unit: Grade0-17811781F5Zero finding position useful only when mechanical Unit: based on gear ratio0-65535.9991.5F6Zero finding speed useful only when machine is Unit: level0-6553550F7Zero seeking mode 0: software 1-3: mechanical where 1 is recommended do not use 20-30F8x function start point useful only when the machine is Unit: the gear ratio shall prevail0-65535.99965535F9x Acceleration the acceleration of the motor starting to the normal speed the larger the faster the acceleration and deceleration values should be consistent as far as possible0-65535 level2000F10x Deceleration deceleration from normal motor speed to stop the larger the faster acceleration and deceleration values should be consistent as far as possible0-65535 level2000F11x System internal debugging parameters do not set0-2553F12x System internal debugging parameters do not set0-42949672956400Function 13xX0-X1-X2 Input signal filtering time unit: level0-6553540When there is external interference set again. The larger the value the slower the responseF14The magnitude of THE SPEED CHANGE in operation can be turned off in F16 Unit: Level0-2552When the motor is in operation the current running speed can be modified through the knob encoder on the panel. The magnitude of the knob change speed is determined by this parameter. The greater the value the knob the greater the range of speed! The smaller the better.Note: The speed after speed change is not saved by default after power failure. If you want to save after power failure press the Confirm button to save in standby state. Speed-saue is displayed.F15Is it automatically returned to after startup? 0: does not return to upon startup 1: automatically returns to upon startup0-10Note: If automatic return to is set on startup software is used for return to by default. The mode needs to be set in [F5-F8] function. If mechanical is set it is recommended to set the back to mechanical F7=1 for the best effect! Returning to can only be a reversal!F16x Special function Settings0-2550Value 0- Normal does not enable any special functions defaultValue 1- Forces knob speed change to turn off.Value 2- Modifies the motor rotation