MPG Handwheel Manual Pulse Generator Split Plastic Handwheel Packaging Equipments Woodworking For Printing Machinery

MPG Handwheel Manual Pulse Generator Split Plastic Handwheel Packaging Equipments Woodworking for Printing Machinery Specification: Condition: Brand NewItem Type: HandwheelMaterial: PlasticColor: As the Picture ShownEncoder Specification: Power Supply Voltage: DC5±10% Pulse Number: 100PPR Output Voltage VH Maximum: Greater than or equal to 3.8V Output Voltage VL Minimum: Less than or equal to 0.3V Output Current: 80mA Model Format: A.B.A-.B- Output Resistance: DIFF Response Speed: 5KHz Current Consumption: 50mA Starting Maximum: 150g Axial Volume minimum: R 2kg±10% Rotation Life minimum: 1KKR Operating Temperature: 0 degrees Celsius /+50 degrees Celsius Storage Temperature: -10 degrees Celsius /+70 degrees Celsius Operating Humidity: 35-80% Vibration Resistance: 0.5G Heavy Strike Resistance: 2GWiring Table Specification: Output Signal: A B V0 V+ A- B- Terminal-Line Driver A: 1 2 3 4 5 6 Instruction: YP800-100B-1L represents a large handwheel with a diameter of 80mm the output is 100 pulses the working voltage is 5V and the output mode is -line output. This product is suitable for CNC machine tools two orthogonal output signals A B 100 pulses The output mode is -line drive. Package List: 1 x Handwheel 1 x Instruction 3 x Terminal Note: 1. The encoder is a instrument. It is forbidden to knock drop bump etc. during installation. Improper installation or use will affect the performance and service life of the encoder. 2. Pay attention to the shaft load of the encoder during installation and must not exceed the limit load. 3. Be careful not to exceed the limit speed of the encoder during use. If the speed exceeds the limit the electrical signal of the encoder may be lost. 4. The wiring must be correct. If the wiring error will cause damage to the internal circuit of the encoder the unused cable shall be insulated before the initial starting. 5. Maximum response frequency limited maximum speed.