MOSKY CLASSIC AC-30 Guitar Pedal Mini Octave Guitar Effector Based on Tech21 SansAmp Character Series Liverpool

Introduction Built in speaker simulation is an integral part of the CLASSIC Series circuitry Each model is tuned to match the speaker cabinet of that amplifier It is designed for a smooth even response as would be achieved by a multiply miked cabinet without the peaks valleys and notches associated with single miking The shape of the speaker curve will not adversely effect or interfere with the frequency response of your own cabinet There is no need to defeat the speaker simulation circuit when using it with a guitar amplifier The speaker simulation works in tandem with the EQ controls to custom tailor the overall sound GUIDE TO CONTROLSLEVEL Adjusts the output level of the unit This control has an exceptionally wide range for maximum compatibility with a variety of equipment LOW HIGH MID On board post EQ section gives you full control like having a studio mixing board at your fingertips Unlike passive tone controls that only cut these active controls cut and boost ±12dB Low is tuned to 125 Hz High frequency is 3 2 kHz Mid is custom tuned for each model DRIVE Adjusts the overall amount of gain and overdrive similar to when the output section of a tube amp is being pushed The first half of the rotation will increase the volume as well as the overdrive VOICE Voiced differently for each pedal in the series It sweeps through varioustonal possibilities associated with each style of amplifier In addition to modifying the frequency response Voice also influence