MOSHINI 100A LCD Display DC Battery Monitor Meter 200V Amp For Car RV Solar System

Length（CM）：14.5 Width（CM）：6.5 Height（CM）：3.5 Weight（G）：200 Feature： -The DC battery monitor is mainly used to measure the voltage current resistance internal resistance capacity SOC energy consumption and running time of various types of batteries and display the measurement data through the LCD screen. Monitor the battery faster and more comprehensively! -9 measurement functions. Including voltage (0-200V) current (0-100A) power (0-20000W) impedance (0-1000Ω) internal resistance (0-999mΩ) capacity (0-1000AH) SOC energy consumption (0 -9999kWh) and running time (0-999h) -Better visual experience. The LCD high-definition display screen can be viewed at 360° without blind spots and has a backlight function which can be clearly seen no matter what day or night. -Screwless and easy to install-With the installation design of push-in terminals the wires can be easily and conveniently installed and removed without screws. -Accurate measurement. High-precision chip control efficient and stable operation safe and reliable welding process and measurement accuracy of 1%. -Wide range of uses-widely used in automobiles solar energy systems industrial assembly lines etc. Measuring: Power: Measuring range: 0-20000W Voltage: Measuring range: 0-200V (when the test voltage is less than 8V please use independent power supply mode) Current: Measuring range: 0-100A Impedance: Measuring range: 0-1000Ω Internal resistance: measuring range: 0-999mΩ Capacity: Measuring range: 0-1000AH SOC: The dumped energy is displayed by the battery symbol there are 10 grids in total and each grid provides 10% energy Energy consumption: measuring range: 0-9999kWh (Note: 1Wh = 0.001kWh = 0.001 kW) Running time: Measuring range: 0-999 hours (no-load time will not accumulate) Measurement accuracy: 1% Note: 1. The wiring sequence cannot be wrong. 2. This meter is only suitable for indoor use. 3. The load applied should not exceed the rated power or current. 4. Need to use a pointing tool to press the function button to prevent accidental touch. 5. Set the current according to the specifications of the shunt. Package Included： 1 x DC battery tester 1 x 100A shunt 1 x cable kit 1 x User Manual