MKS HLKWIFI Module 3D Printer Control Board Remote Control For MKS TFT Touch Screen

MKS HLKWIFI Module 3D Printer Control Board Remote Control For MKS TFT Touch ScreenIntroduce MKS HLKWIFI is created by MakerBase MKS based on HLK RM04 module which is suitable for open source 3D printer Also MKS HLKWIFI is used for MKS Base updated version 1 2 MKS Gen MKS Mini MKS SBase etc those are developed by MakerBase as well as MKS TFT touch screen Features 1 Based on strong and stable HLK RM04 module 2 Using on MKS motherboard directly 3 Work with MKS TFT28 touch screen and all MKS series modules Notice Due to undercurrent MKS HLKWIFI can not work with Ramps1 4 Package includes 1 x 3D Printer Control Board MKS HLKWIFI ModulePlease visit here to download firmware click to opengithub com makerbase mksAppendix 1 Connection Connect to Aux 1 on MKS BASE MKS MINI MKS SBASE MKS GEN MKS BASE only supports V1 2 updated version Usage on Motherboard 1 Connect WIFI module to AUX 1 2 Search for WIFI hotspot and connect 1 Search hotspot HI LINK XXXX and connect Password 12345678 2 If you can not find the hotspot press on button of module for 10 seconds then restore factory settings 3 Attention Under default the baud rate of HLKWIFI is 115200 which must be as the same as firmware 3 Configuration on MKS HLKWIFI1 After enter HI LINK XXXX connect to IP 192 168 16 254 2 Log in accounts admin password admin 3 Proceed network configuration and modify the Client you need 4 Any other help please refer to HLK RM04 user manual 1 31 p