MKS Gen V1.4 Mainboard + JZ-TS35 3.5inch Full Color Touch Screen Kit with Filament Run Out Detection Module for Ramps1.4 3D Printer

Parameter about touch screen: - Model: JZ-TS35 - Color: 262K color - Display size: 3.5 inch - Touch screen type: Resistive touch screen - Resolution: 480*320 px - Can work for: 1. Ardniuo Mega2560+ramps1.4 or integrated board based on 2560 development (such as MK S-Gen/Base mainboard, Micromake mainboard, Ramps Plus2 mainboard) 2. 32-bit main control board: Ardniuo Due+ramps-FD open source mainboard Introductions of Touch Screen: 1. Support power off after printing completed and shut down automatically(with expansion module). 2. Extended SD-card: screen with SD slot, which can also be external expansion. Installation direction and location is unlimited (expansion module). 4. History record: fast search for printed documents 5. File Topping: GCODE Files with the latest slices will be top in the file list. 6 One reset: press the screen reset key, and reset the motherboard together. 7. Convenient shunting: computer-free shunting, brush-free firmware modification parameters (pulse, speed, acceleration, etc.) 8. Support: Dual-extruder printing; leveling support; Limit switch status monitoring; Temperature control curve; Customized instruction menu; Gcode-command-line. 9. Modify machine parameters: Marlin Features about Motherboard : 1. The 2560 and ramps1.4 are assembled on one board, which solves the problem that the Ramps1.4 combination interface is cumbersome and easy to malfunction. 2, replaceable motor drive, support 4988 drive and 8825 drive, TMC2100 drive 3, the circuit board uses a high-quality 4-layer board, and specializes in heat dissipation optimization; Ramps is a 2-layer board. 4, the use of high-quality MOSFET tube, better heat dissipation. 5, using a dedicated power chip, support 12V-24V power input, solve the heating problem of Ramps voltage conversion chip. 6, can accept 24V input, the same system power can reduce the hotbed current to 1/4, effectively solve the hotbed MOS tube heating problem. 7, the firmware can use the open source firmware, Marlin, the configuration and ramps1.4 are exactly the same, can directly replace Ramps1.4. 8, can be directly connected to Ramps1.4, 2004LCD control panel, and 12864LCD control panel. 9. Reserve the motor pulse and direction output port to facilitate the external high current to be connected to a large current (such as 2A, 5A) motor drive circuit. 10. Retain the Servos, AUX-1, and AUX-2 interfaces on Ramps1.4, providing three 5V outputs and three 12V output interfaces. Package List: 1 x MKS GEN v1.4 Motherboard 1 x 3.5-inch color display 1 x Filament run out detection module 1 x Touch Pen 1 x USB cable