MFM Peel & Seal Self Stick Roll Roofing

MFM Peel & Seal is the original patented self-stick roll roofing. Peel & Seal roll roofing is 33ft. 6in. long and is ideal for roofs and surfaces that are difficult to waterproof and can be used on many surfaces including: metal roofs mobile homes RVs or trailers and sunroofs. MFM Peel & Seal can also be used as flashing around ducts vents chimneys air conditioning units or even on gutters. MFM Peel & Seal is made of aluminum composite foil polymer films and a rubberized asphalt adhesive back making it flexible and self-adhering. Peel & Seal roll roofing will not tear crack or dry out over time. It is designed specifically to reflect heat and resist water and exposure to other elements without any additional coverage needed. Peel and Seal can be installed on an EPDM roof but you must prime it with either WeatherBond Multi Purpose Primer or Mule Hide Tape Primer. This self-adhering rolled roofing is very simple to install. Simply make sure your surface is clean smooth dry and free of any loose debris. Be sure to prime your surface with an asphalt primer before applying Peel & Seal especially on weathered surfaces made of plywood OSB composition board and masonry. New plywood surfaces do not require primer. After the roof is prepped you will simply peel off the release paper on the back of your peel and seal and roll it out onto your surface using a hand roller to smooth out any creases. Finally use a sharp knife to cut off the desired length. All 36in. rolls will feature blue guidelines three inches from the edge to assist with overlapping during installation. Please Note: The ALCM Asphalt Primer has several limitations when being used with MFM Peel and Seal. Please view the ALCM Asphalt Primer page to ensure that this primer will work for your application. Thickness: 45 mills Length of Each Roll: 33ft. 6in.