MDHAND 100A MPPT Solar Panel Regulator Charge Controller Auto Focus Tracking 12/24V

Description: 1. Always keep the battery in the charging voltage state 2. Prevent the battery from overcharging 3. Prevent excessive battery discharge 4. Prevent the battery from recharging on the solar panel at night 5. Battery reverse polarity protection 6. Reverse polarity protection of solar panel 7. When the battery voltage is low the controller will automatically reduce the system load. If the voltage battery returns to normal the charging starts again 8. Lightning protection 9. According to the battery voltage level the controller may automatically adjust the charging stop voltage charging stop voltage and load recovery voltage. (The default setting is below 25 ° C locked by the CPU process and cannot be adjusted 10. The controller automatically compensates the temperature. The charging voltage is a function of the ambient temperature change Features: 1. Industrial grade main chip 16AD sampling accuracy temperature accurate real-time discharge current display and clear power generation 2. Automatic focusing MPPT tracking loading high charging efficiency and bi-directional focusing tracking when charging is detected without stopping 3. Large LCD adjustable charging and discharging settings. Ultra wide charging and adjustable discharge. As long as you know the characteristics of the battery and the corresponding charging settings you can charge the battery. When the output is disabled the time can be adjusted for convenience. (There is no point setting on the market) 4. Full three-phase charging management which effectively protects the battery and makes the battery more durable 5. Built in overheat overcurrent and short circuit open circuit protection and reverse connection protection. When the fault is eliminated the controller automatically recovers without damaging the equipment 6. Two way MoS tube backflow prevention circuit high-power charging mode ultra-low heating 7. A5.0 solar charging DC socket R5. 0 DC lamp output DC plug convenient connection Specification: 100A Material: PCB Rated voltage: 12/24V Rated current: 100A Size: 13.5 * 7 * 2.8cm Photovoltaic voltage: 50V PV input power: 1200W (12V)/1200W (24V) Package List: 1 x 100A MPPT Controller 1 x User Manual