M5Stack® PoE Base LAN Module W5500 with POE Ethernet Controller RS485/RS232 Data Forwarding ESP-IDF Support

Description Base PoE is an M5 Base that implements a W5500 Ethernet controller chip with PoE module which provides Hardwired TCP IP embedded Ethernet control to facilitate easier internet connection to embedded systems W5500 integrates TCP IP protocol stack 10 100M Ethernet data link layer MAC and physical layer PHY This base supports RS485 RS232 communication and can be used as an Ethernet to serial port server It is specifically designed for industrial applications PoE Power over Ethernet technology is supported Through the built in PoE module power can be directly supplied to the base through PoE hub switch without a separate power supply It comes with a couple of HT3 96 connectors metal rail and magnet discs for easy installation The 6 pins of the HT3 96 connector are spare you can wire them up with an RS485 or RS232 adapter board as you like Features Support PoE IEEE802 3 AF AT DC input supply voltage 9 24V Ethernet access HT3 96 port for supporting RS485 RS232 communication 8 independent hardware socket simultaneous communication Support TCP UDP ICMP IPv4 ARP IGMP PPPoE protocols Support integrated 10BaseT 100Base T Ethernet PHY Easy to fixed on the wallApplications Ethernet controller Ethernet and RS485 RS232 data forwarding Ethernet network nodePackage Included 1x PoE Base 1x TTL to RS485 adapter board 1x TTL to RS232 adapter board 1x pin header 20pin 1x metal rails and magnet discs 3x HT3 96 terminal 2x 3pin 1x 4pin