M100 ELM327 Bluetooth 4.0 OBD2 Fault Diagnostic Scanner

Function1. Quick Scan: Quickly obtain vehicle information, smoke test, MIL status, and DTC information. 2. Read DTCs: You can read stored DTCs, pending DTCs, and permanent DTCs, and give maintenance instructions. 3. Clear the fault code: After selecting to clear the fault code, the yellow engine fault light on the instrument panel goes out. 4. Data flow: Read the real-time data flow information of the engine, and display the current data flow through numbers, dashboards, graphs, etc. 5. Freeze frame: Read the relevant freeze data when the vehicle has a fault code. 6. Smoke test: Read the status of detectors such as misfire, fuel system, NMHC catalyst, etc. 7. Oxygen sensing: Read the oxygen sensor monitoring test results. 8. Mode 6: Request the on-board surveillance test results for a specific surveillance system. 9. MIL status: read the data before and after the engine failure. 10. Vehicle information: Read vehicle information such as VIN, calibration ID, and simplified verification code. 11. View reports: View reports such as quick scan, fault code analysis, etc.Supported Protocol1. SAE J1850 PWM (41.6Kbaud) 2. SAE J1850 VPW (10.4Kbaud) 3. ISO9141-2(5 baud init, 10.4Kbaud) 4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud) 5. ISO14230-4 KWP (fast init, 10.4 Kbaud) 6. ISO15765-4 CAN (11bit ID, 500 Kbaud) 7. ISO15765-4 CAN (29bit ID, 500 Kbaud) 8. ISO15765-4 CAN (11bit ID, 250 Kbaud) 9. ISO15765-4 CAN (29bit ID, 250 Kbaud)Specification1. Communication method: Bluetooth 4.0 2. Working voltage: 12V 3. Working current: 26mA 4. Working temperature: -40~80 degrees Celsius 5. Working humidity: less than 60% 6. Product size: 47x46x24mm