Liquid Level Meter Ultrasonic Water Liquid Depth Level Meter With Temperature Display Sensor Water Level Gauge Water Detectors Alarms

Liquid Meter Water Liquid Depth Meter with Temperature Display Sensor Water Gauge Water Detectors Alarms Specification: Description: Keep an eye on your outdoor water from the comfort of your own living room up to 100m away. Installed at the top of your water the transmitter unit measures the water using an sensor and temperature using a thermo sensor. You can the receiver unit on a wall or pull out the stand and place it on your kitchen bench top table or desk. View your room s temperature temperature and water represented by a 10 graph. You can store min/ records and set alarms for specific water levels high/low or when empty. Features: This meter monitors liquid depth and displays on a 10- LCD graph. It can keep min/ records of liquid . Supports liquid high/low alarm and liquid empty alert. Displays indoor temperature ℉ or degrees Celsius and temperature ℉ or degrees Celsius at the same time. The receiver can be put standing on desk or hanging on wall. Specification: Indoor Temperature Range: 0~50 degrees Celsius Outdoor Temperature Range: -40~60 degrees Celsius Temperature Accuracy: ±1oC Water Measure Rang: 0~15m Resolution: 0.01m Accurate: +/-0.03M Frequency: 433MHZ Range: 100 meters300 feetin open area Interval: 30s when changes or 3 minutes when does not change Receiver Battery: 2X AA 1.5V LR3 Alkaline batteries Not included Transmitter Battery: 6X AAA 1.5V LR6 Alkaline or lithium batteries Not included Battery Life: Minimum 12 months for receiver Minimum 12 months for transmitter Receiver Size: 108x94x27mm Transmitter Size: 97x68x152mm LCD Size: 66x45mm3.3 inch Suitable Liquid Type: All non-corrosive liquid Open Distance: Approx.100M/328.1ftEffective Distance : Approx.30M/98.4ft Package Includes: 1 x Water Sensor Transmitter 1 x Indoor Receiver 2 x Screws Batteries are NOT included Note:Note that the product is not waterproof.1. Install the battery in the battery compartment of the transmitter do not insert the battery compartment and insert the battery synchronously after the receiver is set up 2. The liquid indicator has no data press the key and the data will be displayed.3. When reset remove the battery Wait for a while and then turn on the power to eliminate the remaining power in the machine.4. Whether the red light of the transmitter flashes the flashing is normal and .