LILYGO® TTGO T-Beam ESP32 433/868/915Mhz WiFi Wireless bluetooth Module ESP-32 GPS NEO-6M SMA LORA 32 18650 Battery Holder

Product Upgrade Content: 1. Pin GPIO34 pin is replaced with GPIO35 2. Replace the charging IC (TP5400) with the power management AXP192 3.GPS TX, RX pin replacement 4. Power on and remove, replace with button to open 5. Reduced sleep current 6. GPS battery replacement Features: ESP32 Lastest ESP32 Version: REV1 WIFI bluetooth 4MB Flash 3D Antenna LORA Working voltage: 1.8~3.7v Acceptable current: 10~14mA Transmit current: 120mA@+20dBm 90mA@+17dBm 29mA@+13dBm Operating frequency: 433MHz/868MHz/915MHz Transmit power: +20dBm Receive sensitivity: -139dBm@LoRa &62.5Khz&SF=12&146bps -136dBm@LoRa &125Khz&SF=12&293bps -118dBm@LoRa &125Khz&SF=6&9380bps -123dBm@FSK&5Khz&1.2Kbps Frequency error: +/-15KHz FIFO space: 64Byte Data rate: 1.2K~300Kbps@FSK 0.018K~37.5Kbps@LoRa Modulation Mode: FSK, GFSK, MSK, GMSK, LoRa TM, OOK Interface form: SPI Sleep current: 0.2uA@SLEEP 1.5uA@IDLE Operatingtemperature: -40- +85 Digital RSSI function Automatic frequency correction Automatic gain control RF wake-up function Low voltage detection and temperature sensor Fast wake-up and frequency hopping Highly configurable data packet handler GPS GPS modules NEO-6M, 3V-5V power supply Universal Destined module with ceramic antenna, signal super Save the configuration parameter data EEPROM Down With data backup battery There are LED signal indicator Default Baud Rate: 9600 Power IP5306 2A Bat tery Management LED indicator: There are 4 LEDs show the battery status in real time. Power button: Click one time will start. Fast click 2 times will shut down. USB CP2104-GMR Product Details: Pin Schematic: Package included: 1 x TTGO T-Beam ESP32 1 x Antenna 2 x Pin