LCWSS-2-D5RF 433MHz Ewelink Voice Control Mobile Phone APP Remote Control Two-way WiFi Switch Module DC5-80V

Parameters Input voltage AC90V 250VMaximum current 10AOutput signal type relay switch signal common terminal COM normally closed terminal NC normally open terminal NO can be used to control equipment with working voltage of DC0 30V AC0 250VOutput Jog self lock interlock control signalsWireless networking WiFi 2 4GHzb g nExternal materials fire retardant materialsRemote control power 12V23A batteryFunction Support one phone to control multiple devices at the same timeSupport multiple mobile phones to control one modified partSupport charging protection to prevent overchargingSupport smart timingSupport mobile APP remote controlSupport Xiaodu Genie Xiaoai etc voice controlInstructions for 433MHz remote control A and B keys can control channel 1 and channel 2 on off respectivelyThe remote control has been paired with the 433MHz receiver module in the device by default If you need to pair another remote control methods as below 1 Code matching method Press and hold the button 2S on the 433MHz receivermodule inside the device the indicator light is on then release then press any key on the remote control the indicator light flashes and blinking 4 times means that the pairing is successful 2 Code clearing method Press and hold the button on the 433MHz module inside the device for more than 8S the indicator light goes out indicating that all remote controls have been successfully cleared Note Because the module is powered by AC90 250V you must