Kafuter K-5203 80g Heatsink CPU Thermal Conductive Silicone Grease Paste Glue Adhesive LED Light Silicon Rubber Gel

Features This product is a neutral through reinforced silicone elastomer gel both bonding effect and good thermal conductivity heat thermal effect is excellent with good resistance to high temperature curing adhesive Changes performance long term use will not fall off no contact with the gap the cooling effect is not reduced Uses The main application is to replace the thermal grease paste for the CPU and radiator thyristor Intelligent control module and radiator high power electrical modules and heat sinks between the filling bonding With this glue you can remove the traditional way of connecting with cards and screws resulting in a more reliable filling of heat simpler processes and more economical costs Before Curing Color WhiteViscosity CP Thixotropic pasteDensity g cm3 2 0 2 5 Table dry Time 25℃ min ≤30 After Curing Tensile strength MPa ≥2 5Elongation at break ≥100Shear Strength MPa ≥1 5Hardness Shore A 50 65Operating temperature range ℃ 60 280Dielectric strength kv mm ≥18Dielectric constant 60hz 2 8Volume resistance ω cm 1x1015Thermal conductivity w M K 1 2 How to use 1 Will be glued or coated surface finishing clean remove rust dust and oil and so on 2 screw open pipe cap the glue squeeze to have cleaned the surface so that the distribution will be glued to the surface of the closure can be fixed 3 will be glued or sealed good parts into the air so that its natural curing The curing process is a