KSGER T12 Soldering Station STM32 Digital Controller ABS Case Soldering Iron Auto-sleep Boost Mode Heating

Specification Input Voltage AC110 240VPower Supply 24V 5ATemperature Range 40 500℃Tin Melting Time 8sOutput Power 72WAuto Sleep YesBoost Function YesController STM32 DigitalSize 150 x 88 x 38mmCase Material ABS Plastic Operation Instructions 1 There are 4 working modes Boost mode working mode sleep mode and shutdown mode 2 Short press to enter the Boost mode Boost temperature and Boost time can be set Boost temperature setting 5 100 degrees Boost setting 1 30 minutes3 Working mode the working temperature range is 40 500 degrees the maximum temperature is limited to 550 degrees and the default is 300 degrees 4 In sleep mode double click to enter sleep time is set to 0 60 minutes and sleep temperature is set to 40 300 degrees 5 In the shutdown mode the combo is turned off three times the detection time is 0 60 minutes and the heater stops heating after the shutdown mode is started Menu press and hold the encoder for 3 seconds to be into the menu P 0Boost temperature setting default 50 degrees P 1Boost time setting default 5 minutes P 2Sleep temperature setting default 200 degrees P 3Sleep time setting default 10 minutes P 4shutdown time setting default 30 minutes P 5temperature calibration linear calibration parameters divided into three points 400 330 260 degrees P 6Restore default settings 0 cancel 1 OK Work Description If No T12 Handle or NO T12 tip is inserted into the soldering station or the T12 tip is bad But