KGX MAGXIN Desoldering Braid Solder Remover Wiick 3.5mm 1.5M Wire Sucking Tin Absorption No-Clean Line for Mobiile Phone

Feature 1 Used to remove excess solder when removing tin it is resistant to oxidation and corrosion has good heat conduction and tin loading performance and clean tin absorption 2 The soldering wire can be used to clean BGAA components on PCB 3 The tin on the pins can be sucked away to ensure that there is no short circuit between the pins 4 In desoldering after the chip is removed there will be a lot of solder on the circuit board it can effectively clean the pad 5 Widely used in suction tin mobiile phone interior electrical room electronic products household appliances computer motherboard Specification Name Desoldering Braid Solder Remover Wiick Wire BGAA Repair ToolModel CP 3515Width 3 5mmTotal length 1 5m 4 9ftStorage methodd sealed and protected from light dry and moisture proofScope of application suitable for cleaning PCB boards and other solderInstructions 1 For the solder that you want to remove put an appropriate length of the suction wire on the cleaned reflow point and then lightly press and heat it with the electric iron welding nozzle After the solder melts it will be absorbed by the suction wire 2 Once the solder is sucked please remove the electric wire and the solder wire at the same time 3 Please use cutting pliers to cut the used suction wire Package included 1 xDesoldering Braid Details Pictures