Integrated Circuit Ic Chip Tester Transistor Digital Transistor Ic Chip Detector

Features: *The product is made of high-quality materials and has guaranteed quality *Can test 74ch series osmo series cd4000 series hef400 series 4500 series operational interface chip optocoupler triode automatic identification voltage regulator voltage value identification *It can also test and integrate more than 1 300 chip data models and more than 420 transistor data models covering the most common general-purpose devices within 24 pins greatly reducing maintenance workload and improving work efficiency. *The product has exquisite appearance and is easy to carry *Professional equipment with buttons simple and convenient operation Panel introduction: *There are seven buttons on the panel for up down left right typing keys and hotkeys o and p. *The up and down keys are used to adjust the catalog and change the model and the left and right keys are used to move the cursor left and right to select the item to be changed. The input key is used to change machines and execute test commands. Open the battery covers on the two 5# 1.5v batteries and then close the battery covers. Press the Enter key for more than 2 seconds to turn on the phone and the current battery voltage will be automatically displayed. When the battery power is too low please replace the battery. If the voltage is too low it will affect the reliability of the test results and the automatic shutdown protection. *Power on: Press the Enter key for more than 2 seconds to power on. *closure: *Press the Enter key in the OFF directory to shut down the machine immediately. *Press to enter any directory and press the Enter key for more than 10 seconds to hang up. *Automatically shut down after 60 seconds of no operation *Shortcut key 1: Press 0 key to quickly shut down (Type 06) *Button 2: Press p key to repeat self-test and reset button Device positioning method: *Place the chip and optocoupler above the traces and align the 1-pin IC with the base. *The transistors on the left are mostly three sockets. *Place the IC regulator on pins 13 and 14. Note: The order of the transistor display pins from left to right corresponds to the 10-pin 11-pin and 12-pin ic blocks respectively. (Not built-in battery or adapter) Package Included: 1X tester or 1X tester + 16PIN burner X1 + 20PIN burner X1 + 24PIN burner X1 Notes: 1. Due to various factors such as display brightness and light brightness the actual color of the product may be slightly different from the website picture. 2. Please allow a slight deviation between the data and the manual measurement.