Holybro Kakute F7 Flight Controller Betaflight OSD+Atlatl HV V2 5.8G FPV Transmitter for RC Drone

Holybro Kakute F7 Flight Controller Betaflight OSD Atlatl HV V2 5 8G FPV Transmitter for RC DroneSpecification Holybro Kakute F7 Brand name HolybroItem name Kakute F7 MCU STM32F745 32 bit processorIMU ICM20689 SPI Barometer BMP280USB VCP Driver all UARTs usable simultaneously USB does not take up a UART 6 hardware UARTS UART1 2 3 4 6 7 All UARTS support hardware inversion SBUS SmartPort and other inverted protocols work on any UART without uninvert hack Supports serial receivers SBUS iBus Spektrum Crossfire only PPM and PWM receivers are not supported TF card for Blackbox loggingDimensions 35x41x7mm includes foam mounted gyro board in height Mounting Holes Standard 30 5mm square to center of holesWeight 9gFeatures Supports Betaflight Butterflight and Cleanflight Betaflight OSD Change PIDs adjust common configuration parameters and change video transmitter channel andpower level all using your transmitter sticks and goggles Soft mounting built in The IMU gyro chip on this board is mounted on vibration isolating foam This means thatthere is no need to soft mount the board itself High performance low noise high sensitivity IMU ICM20689 with 6 axis gyro and accelerometer Can run at upto 32 kHz sampling rate Ready for autonomous flight Integrated BMP280 barometer and SCL SDA pads for use with external GPS magnetometer units 2 oz copper PCB allows up to 120A maximum continuous current Dedicated bootloader button for easy firmwar