Happymodel Mantis85 85mm RC FPV Racing Drone RTF w/ Supers_F4 6A BLHELI_S 5.8G 25MW 48CH 600TVL

Happymodel Mantis85 85mm FPV Racing Drone RTF w/ Supers_F4 6A BLHELI_S 5.8G 25MW 48CH 600TVL Notes: the RTF version comes with Flysky FS-I6 remote controller MODE2 left throttle. Specification(user manual): Brand name: Happymode Item name: Mantis85 85mm FPV Racing Drone Wheelbase: 85mm Size:100mm*100mm*25mm Weight: 49g( battery not include) Flight controller: Supers_F4 Flight controller built-in OSD Motor: Happymodel SE1102 KV9000 Propeller: 48mm 3-blade propeller Camera: 600TVL HD CMOS 1/4inch VTX: 5.8g 25MW 48CH NTSC/PAL Video transmitter Remote controller: Flysky FS-I6, MODE2 left throttle Battery: 7.4V 400mah 30C lipo battery OSD: Betaflight OSD Firmware of Flight controller: Betaflight 3.1.7 Flight time : 4minutes Buzzer Ready Flight controller: Size: 20mm*20mm Mount hole: 16mm*16mm Processor: STM32F405RGT6 MCU Sensor: SPI Sensor MPU6000 Built-in Betaflight OSD ( Batt voltage, RSSI, Fly mode Flytime, Craft name etz.) Firmware version: Betaflight 3.1.7 Dshot600 ready Target: OmnibusF4SD ESC: Size:25mm*29mm Mount hole: 16mm*16mm Firmware version: BLHELI_S 16.5 BB2, 48MHZ Chip Lipo Battery: 1-2S Con. Current: 6A Pea.k Current: 10A (5S) Programming: YES Betaflight passtrough ready Dshot600 ready(Default) Support oneshot42 oneshot125 Multishot Dshot Flysky FS-I6: Channels: 6 Channels Model Type: Glider/Heli/Airplane RF Rang.e: 2.40-2.48GHz Bandwidth: 500KHz Band: 142 RF Power: Less Than 20dBm 2.4ghz System: AFHDS 2A and AFHDS Code Type: GFSK Sensitivity: 1024 Low Voltage Warning: Less than 4.2V DSC Port: PS2 Output: PPM Charger Port: No ANT length: 26mm*2(dual antenna) Transmitter Weight: 392g Package Weight: 628g Transmitter Size: 174x89x190mm Package Size: 23.5x21.2x10.6cm Power: 6V 1.5AA*4 (Not Included) Display mode: Transflective STN positive type, 128*64 dot matrix VA73*39mm,white backlight. On-line update: Yes Color: Black Certificate: CE0678,FCC Model Memories: 20 Control Rang.e: 500m Features: -Full carbon fiber glass and CNC aluminum alloy structure -Extremely light and Solid Frame -More powerful SE1102 motor -More powerful STM32F4 MCU + BLHELI_S ESC make your Operating feel more stability and silky -Adjustable Angle of Camera -Jaw-dropping flight performance -Betaflight support -Ac.ro mode / Air mode /Angle mode support -Built-in OSD(Using F4 MCU controls OSD over SPI bus in DMA mode) -OSD Configuration has been include in BETAFLIGHT GUI -Radio Stick to control PID Tunes -BLEHELI_S pass-through ready -Frsky Mode :Telemetry RSSI Output ready Package included: 1 x Happymodel Mantis 85 Frame kit 1 x Super_s F4 Flight controller build-in Betaflight OSD 1 x Flysky AFHDS2A Receiver 4 x Happymodel SE 1102 KV9000 brushless motor 1 x Super_S BS06D 4 in 1 ESC Dshot600 4 x 1935 3-blades propeller CW 4 x 1935 3-blades propeller CCW 1 x 600TVL HD CMOS 1/4 inch camera 1 x 5.8g 25MW 48CH NTSC/PAL VTX with Raceband 1 x 7.4V 400mah 30C lipo battery 1 x Buzzer 1 x Flysky FS-I6 remote controller MODE2 left throttle