Hantek DSO1202B Handheld Oscilloscope/Multimeter 200MHz 1GSa/s

Features
200MHz Oscilloscope, 1GS/s sample rate, and 6000 Counts DMM with analog bargraph.
1M Memory Depth.
High Refresh Rate (2500 frames).
Large 5.6 inch TFT Color LCD Display; High Resolution(640*480); Dual-Window Design --More clear, More Detailed
One-touch automatic setup optimizes the position, range, timebase, and triggering to assure a stable display of virtually any waveform.
Easy-to-use pop-up menu with built-in multi-language help system.
32 Automatic Measurements.
Waveform Math: Add, Subtract, Multiply, and Divide.
Store and recall over.
Automatic cursor tracking measurements.
XY Mode.
Built-in FFT function converts a time-domain signal into its frequency components to measure harmonic content and distortion in systems.
Waveform Recorder to capture/replay input waveforms from CH1 and CH2 with a maximum record length of 1000 frames.
Pass/Fail function compares a stored waveform to an unknown input.
Average Mode for smoothing waveforms.
Square Wave Output (2V, 1kHz) for probe adjustment.
USB Host/Device 2.0 full-speed interface; support removeable disk; LAN Option, easy to control by PC or long-distance.
Dimensions (mm): 240(L)x165(W)x50(H), be carried easily.
Specifications
Oscilloscope Mode
Bandwidth
200MHz
Real-time Sample Rate
1GSa/s
Equivalent Sample Rate
25GSa/s
Record Length(Sample Points)
Single-channel: Maximum 1M; Dual-channel:Maximum 512k
SEC/DIV Range
2nS/div-2000S/div (in a 2, 4, 8 sequence)
Delay Time Accuracy
500ps
Vertical
A/D Converter
8-bit resolution
VOLTS/DIV Range
2mV/div～5V/div at input BNC
Position Range±50V(5V/div)±40V(2V/div～500mV/div2V(200mV/div～50mV/div)&plusmn400mV(20mV/div～2mV/div)
Rise Time at BNC≤1.7ns
DC Gain Accuracy±4% for Sample or Average acquisition mode, 5mV/div to 2mV/div±3% for Sample or Average acquisition mode, 5V/div to 10mV/div
Trigger
Trigger Sensitivity(Edge Trigger Type)
DC: CH1/CH2(Typical) 1div from DC to 10MHz;1.5div from 10MHz to FullAC: Attenuates signals below 10HzHF Reject: Attenuates signals above 80kHzLF Reject: Attenuates signals below 150kHzNoise Reject: Reduces trigger sensitivity
Trigger Level Range
CH1,CH2: ±8 divisions from center of screen
Trigger Level Accuracy, typical (Accuracy is for signals having rise and fall times ≥20ns)
CH1,CH2: ±(0.3div×V/div) (within ±4 divisions from center of screen)
Holdoff Range
100ns-10s
Trigger Type
Edge
Trigger on the rising or falling edge
Pulse Width
Trigger (when >,
Pulse Width Range
20ns-10s
Video
Trigger on an NTSC, PAL, or SECAM standard video signal
Line Range
1-525 (NTSC), 1-625 (PAL/SECAM)
Slope
Trigger (when >,
Overtime
from the rising or falling edge Set Time: 20-10s
Alternate
Internal trigger on edge, pulse width, video or slope
Measurement
Cursors
Manual: The difference between voltage cursors △V; the difference between time cursors △T; 1/△T calculated by Hz.Tracing: The voltage and time at a waveform point
Automatic
Pk-Pk, Max, Min, Mean, Cyc RMS, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width
Meter Mode
Max.Resolution
6,000 Counts
DMM Testing Modes
Voltage, Current, Resistance, Capacitance,Diode & Continuity Max. Input Voltage: AC: 600V, DC: 800V
Max. Input Current
AC: 10A , DC: 10A
Input Impedance
10 MΩ
Display
Type
Right angle 5.6 16-digit color LCD
Resolution
640 x 480 dots
Contrast
16 gears, with the progress bar to show adjustment
Interface
USB host and USB slave, Lan Optional
Power Supply
Voltage
DC Input:12--17VDC, 1500mA
Package Size
25 x 17 x 10 cm
Package Weight
1300g