HS18-580 18 Channel Remote Control Receiver Charging Remote Control Set for Excavator Toy Car

Specification Receiving board size 8 95cmRemote control size 1611 5cmDescription The 18 channel self proportional speed control function can control 4 proportional speed motors 3 forward and reverse motors 1 single steering motor The remote control reserves SMA antenna interface which can be connected to the signal booster to increase the remote control distance Remote controller frequency allocation and power on play mode1 The remote control frequency of this product is 2 4G When using it install the power supply of the receiver and ensure that it is powered on Turn on the power switch and turn on the frequency automatically The sound of Dididi will indicate the completion of the frequency matching For the USB charging cable use a charger with an output voltage of DC5V and an output current of less than 2000mah 2A The operating voltage range is DC6V 12V the input voltage is the same as the output voltage each single output has a maximum peak current of 7A and a sustainable load current of 4A Note When choosing a motor you can t just look at the no load current you must know the operating voltage and load current or locked rotor current of the motor as long as the voltage and load current or locked rotor current of the motor are the voltage and current specified on the receiving board It can be used within the parameters don t understand and use blindly after use mismatch will lead to excessive current damage to the receiving motherboard please use