Gupbes Motor Drive Controller Board Module Car Driver Board 700W For Car Replacement Car Hall Balanced Car

Features: With the overload protection and current abnormal protection function. Has the locked-rotor protection function if motors can not start within 5s repeatedly module will stop output. Adjust voltage VR port to 0v or power off the protection status can be removed when power on again. With the soft commutation function this function has the effect ofprotecting the power tube and the motor in many applications improvingthe service life of the drive and motor. The function of the speed pulse signal output depending on the motor each circle ofthe output pulse number is different. Enable function EL port high level (5v) motor work low level (0v) motor stop. Specifications: Working voltage: 36V-72v Operating current: ≤15A Driving power: ≤700W Speed adjustment voltage: 0v-5v PWM speed control frequency: 1KHz- -10khz Work temperature: - 40-85 ℃ Work humidity: ≤90%RH Dimensions: 63 x 42 x 33mm/2.48 x 1.65 x 1.29inch(control end hall end is 2.54 socket motor end is 3.96 socket) Wiring: VCC (power + input36-72V) GND (power -) MC (motor phase line W) MB (motor phase line V) MA (motor phase line U) Package Included: 1 x 700W Brush less Motor Controller