Godox FT433 C For Canon Version 2-Piece Set High-Speed Trigger System DSLR Hot Shoe Flash Transmitter+Receiver

1. Sync Hole Trigger: Supports cameras with a PC output port 2. Power Supply: Transmitter: 2 x AA batteries (not included); Receiver: Plug-in power3. Flash Modes: TTL auto flash, manual flash, stroboscopic flash, high-speed sync, rear-curtain sync (must be set on the camera for FT433 S and FT433 N) 4. Exposure Compensation: +/-3 EV (exposure value), adjustable in 1/3 EV increments 5. Focus Assist: Available (requires camera support for this feature)6. Modeling Flash: The flash’s modeling light can be controlled via the trigger (FT433 S does not support this feature) 7. Buzzer: The flash’s buzzer can be controlled via the trigger 8. Wireless Shutter: The receiver can trigger the camera via the 2.5mm sync terminal 9. ZOOM Setting: AUTO / Focal Length 24–200mm 10. TCM Conversion: Converts TTL exposure values to M output values 11. Firmware Update: Firmware updates via the Type-C port on the unit 12. Memory Mode: Settings are automatically saved after 2 seconds and restored upon restart 13. Display: Widescreen LCD display with adjustable backlight (on/off) 14. Transmission Range: Approx. 0–100 meters15. Built-in Wireless: 433 MHz 16. Modulation: GFSK 17. Channels: 32 18. Wireless ID: OFF / 01–99 19. Groups: 5 or 16 groups (selectable in the menu) 20. Menu Language Support: Chinese, English21. Dimensions: FT433 Transmitter approx. 6.2 x 10.1 x 4.9 cm; FR433 Receiver approx. 2.5 x 5 x 1.3 cm22. Net Weight: FT433 Transmitter approx. 97 g; FR433 Receiver approx. 10 gFeatures:1. Built-in 433 MHz wireless module with strong anti-interference capability and signal stability. When paired with the FR433 receiver, the FT433 trigger supports 32 channels and wireless ID settings ranging from 0 to 99, enabling wireless synchronization of up to 16 sets of flash equipment simultaneously2. Fully supports TTL automatic flash metering and High-Speed Sync (HSS) up to 1/8000 second, effectively meeting various demanding creative photography needs such as underexposing in bright environments and capturing fast-moving subjects3. Supports multi-contact mode for full parameter transmission, as well as single-contact mode. In single-contact mode, the trigger and camera do not exchange additional data, resulting in faster continuous shooting speeds than multi-contact mode, meeting the demands of high-frequency continuous shooting4. Features a TCM (TTL-Convert-Manual) conversion function. When enabled, TTL auto-exposure settings can be quickly converted to manual (M) mode settings with a single button press, simplifying the cumbersome metering process and reducing TTL pre-flashes to achieve energy efficiency and high performance5. The base features a quick-release hot shoe latch design, ensuring quick installation and removal while remaining secure and durable6. Supports Bluetooth connectivity, allowing remote control via a mobile app to perform complex operations such as adjusting flash mode, power output, and modeling light settings