Generic Wireless Water Sensor Smart Water Sensor Smart Water Leakage Detector For ZigBee Wireless Water Sensor Kitchen Bathroom Sensitive Flood Detector For Tuya

Feature: 1. [Waterproof] The safe waterproof panel can work normally even if it is touched with wet hands the surfaces is splashed or even covered by water to avoid moisture damage to the internal electronic components. 2. [Send Alarm] When the sensor detects water it can send an alarm to your phone and activate a local alarm to prevent water leakage and flooding. 3. [Simple To Install] Ultra small design no wiring or screws required you can put it in any place where dripping and water leakage may occur. 4. [Sensitive] Designed with a sensitive water leakage probe the water level threshold is 0.5mm which is safe and stable so you can use it with confidence. 5. [Widely Application] Smart water sensor is widely used in a variety of situations such as kitchens bathrooms offices hotels etc. Specification: Item Type: Water Leakage Detector Material: ABS+silicone Wireless Technology: For ZigBee3.0 Working Temperature: -10℃~+55℃ Power Supply: A CR2032 button battery 150mah Battery Included Power Supply Life: More than one year calculated 20 times per day Product Size: Approx. 5 x 5 x 1.7 cm / 2 x 2 x 0.7 in Weight: Approx. 32g / 1.1oz Package List: 1 x Water Leakage Detector Battery Included 3 x Manual English/German/Spanish How to use: 1. Turn on the product power. Insert a thin blade or coin into the slot of the battery cover and then turn it counterclockwise to open the battery cover. 2. Remove the battery insulation film and turn on the power 3. Press and hold the button for 5 seconds to restore the product to factory settings. After restoring the factory settings the status indicator will flash green quickly and the product will automatically enter the configuration mode.