Geekcreit® DIY 32V 4 Channel Jog/Inching And Self-locking + 433MHz Receiver Module + APP Remote Control For WIFI Wireless Smart Home Switch

Description: WIFi control model, no need to program. No matter where you are, you only need to download a APP to connect the wifi and control the cloud. Features: 1. With signal instruction light and relay pull-on instruction light 2. Power < 1W, and quiescent current:80mA 3. Cutover current< 10A Cutover voltage< 250V 4. 10A Relay Model 5. The life of Relay Model is more than 1,000,000 6. Insulation resistance: 100M 7. Maximum pull-on time: 15mS 8. Maximum release time: 5mS 9. Working Temperature: -40 to 70degree 10. Working Humidity: 40% to 80% RH Function: 1. Default inching Function: Press the open relay by mobile phone, then cut off the pull-on imediately(default one second) it has the timing-share function at the same time. 2. Self-locking when press the inching and locking button with the light on. Press open relay to pull-on, press close relay to cut off. Receiver Features: 1. Receiver sensitivity: -110dBm; 2. Operating frequency: 315MHz; 433.92MHz; 330MHz; 390MHz; 418MHz 3. Power supply input range: 3.3V-5.5V; 4. Low power cosumption 5.0V@ 433.92MHz, 3.8-4.1mA; 5.0V@ 315MHz, 2.5-2.8mA; Manchester Encoding could last the transmited speed to 2.4K. 5. Pin Description: From left to right ANT, GND, LED, SW, VT, D0, D1, D2, D3, VDD, GND 6. Working temperature range: -30-85 7. Good local oscillator radiation suppression, receiver module could be worked in groups without any affect. Remote Control Technical Parameters: 1. Working voltage: 12V23A Battery 2. Operating Current: 9mA 3. Oscillation mode: SAW resonators 4. The shock resistance: 4.7M, 3.3M, 330K 5. Operating frequency: 315MHz, 433MHz 6. Modulation: ASK 7. Frequency deviation: 150kHz (max) 8. Encoding: welding code, learning code 9. Chip Model: PT2262, PT2264 (fixed code); EV1527.PT2240 (learning code) 10. The transmit power: 15mW Code Method: Press and hold the key for 2 seconds short study, learn indicator light at this time that has entered the state of learning; learning key is released, the remote control A key indicator flashes 4 times indicates success in learning, and exit learning mode. Clear Code Method: Press and hold learning key indicator lit, hold about 8 seconds after the light is off, all the code has been successfully cleared. Applications: 1. Car door remote control switch (RKE); 2. Remote control door opener; 3. Wireless security alarm; 4. Remote curtains; 5. Wireless industrial controller; 6. Wireless data transmission. Click to know more information Package Included: 1 x 32V 4CH module 1 x Remote Control 1 x Antenna 1 x Receiver