GFSK 2.4G Wireless Six Axis Gyroscope Voice Remote Control Air Mouse

Product icon IR Learning ( take the example of learning"power"button) 1. Keep pressing"Power"button. The air mouse enters IR learning mode when the LED flashes slowly. 2. Press the"power"button when you aim the IR transmitter with air mouse. Air mouse receives the code successfully if LED light. 3. LED flashes slowly means that Air mouse has finished learning. 4. Data will be saved automatically and the product will exit learning mode. 5. Press"OK"+ "DEL"to clean the code up. Air Mouse has 3 levels of cursor speed. From slow to fast: Press and hold"ok"and"Volume +"buttons. The speed adjusts one level when LED light on. From fast to slow: Press and hold"ok"and"Volume -"buttons. The speed adjusts one level when LED light on. Voice Switch: Press and hold"Voice Switch"to turn on voice channel. Release the key to turn off voice channel. Low battery reminder: The red light ashes slowly when the AAA battery power of the product is lower than 2V. It means that the battery need to be replaced at this time. Sensor Calibration Automatic calibration: The changes of voltage and temperature may make the cursor drifts . In this case, put the mouse flat on the desk and remain still. You can complete calibration by pressing any key to wake it up when it is in hibernation mode. How to Use For initial use, plug a USB receiver into the USB port of device and wait for 20-60 seconds to install driver of USB receiver . Move the mouse the mouse cursor can move on the screen means that pairing is successful. If it is unsuccessful, press and hold"OK"and"Home"buttons, LED light begin to flash. Pairing is successful when LED light stop flashing. Product specifications Transmission method: 2.4G RF wireless Sensors: 6 axis Gyroscope Number of keys: 18 Range: >10m Battery Type: AAA*2 Material: ABS Plastic and silicone Size: 160*45*20MM Weight: 60g Note: 1. Non-professional are prohibited to use the test mode of the product. Under normal use, re-install the battery to restore it If red light always lighting. 2. IR Learning only for"power"key. 3. This product is divided into gyroscope version and no gyroscope version, Gyroscope version: Swing your wrist to control the direction and movement of the mouse pointer. Gyroscope-free version: Move the mouse pointer by pressing"up" "down","left"and"right"buttons on a virtual mouse.