For DJI Avata RCSTQ 1379600 Battery Quick Release Flight Tail UAV Accessories(Orange)

1. Cut the airflow and accelerate forward: adopting dynamic design, the empennage can help the fuselage cut the airflow and reduce air resistance 2. Lightweight design, no weight feeling: made of lightweight industrial materials, no weight feeling, free flight without burden 3. Press the buckle to easily take out the battery: the original battery is difficult to disassemble, and the flight tail has added a battery quick release design to easily take out the battery by pressing 4. Anti-drop protection, ground cushioning: double-layer 3D material printing, can withstand a certain force of falling impact, and provide the first layer of grounding cushioning force for the drone after it falls 5. The smart small tail can not only improve the appearance of AVATA UAV, but also attract more attention and quickly locate the UAV position during flight 6. Industrial-grade 3D printing, strong and durable: use 3D printing materials and high-precision printing to make the flight tail more solid and durable, and the battery is not easy to fall 7. Applicable models: suitable for DJI AVATA 8. Size: 6.6x6.9x4.2cm 9. Net weight: 11.4g 10. Gross weight: 36.1g 11. Note: The product only includes the flight tail, not including the drone Installation steps: 1. Turn the flight tail blade upwards, install the clips on both sides on both sides of the battery firmly and not loose 2. Install the battery with the flight tail on the drone 3. Then install the battery interface to the power socket of the drone to complete all the installation Disassembly steps: 1. Pull out the battery connector 2. Press the front end of the flight tail, and take out the drone battery and flight tail backwards 3. After lifting one side of the flight tail, take off the flight tail