FlySky FS-BS4 2.4GHz 4CH ASHDS 2A RC Receiver PWM/PPM/I.bus/S.bus Output with Gyroscope Function for RC Car Boat

FlySky FS BS4 2 4GHz 4CH ASHDS 2A RC Receiver PWM PPM I bus S bus Output with Gyroscope Function for RC Car BoatOVERVIEW FlySky FS BS4 a gyro embeded receiver has 4 channels In addition to the regular functions it can also be used with a transmitter with S V C Smart Vehicle Control function to realize a smart control over the car and make sure the car travels in the expected direction even on bumpy slippery surfaces or during cornering Specification Brand Name FlySkyItem Name FS BS4 ReceiverDimensions 35 4 29 6 13mm Weight 20g PWM channels 4CHWireless frequency 2 4GHz Wireless protocol AFHDS 2A Range 100 300m ground Antenna type single antenna 150mm Power 4 0 6 5V RSSI Supported Data port PWM PPM i bus s bus Temperature range 10 ℃ 60 ℃ Humidity range 20 95 Online Update Yes Certification CE Binding 1 Turn on the transmitter check the RF standard and if necessary change it to AFDHS 2A 2 way For detailed instructions refer to the transmitters manual 2 Set the transmitter to bind mode For detailed instructions refer to the transmitters manual 3 Make sure the receiver is powered off 4 Connect the bind cable to the BIND VCC port on the receiver Then connect the power to any other ports on the receiver The red indicator starts to flash rapidly indicating that the receiver is in bind mode 5 Wait till the indicator stops flashing which means binding is finished 6 Disconnect the bind cable and power from the receive