FY8300S-20MHz/40MHz/60MHz Signal Generator Signal-Source-Frequency-Counter DDS Arbitrary Waveform Three-Channel Signal Generator

Features: This manual applies to each model of FY8300S series Function/Arbitrary Waveform Signal Generator. The last three characters of the model indicate the up limit output of Sine Wave (MHz). For example, the "60M" of the Model Number "FY8300-60M" indicates the Sine wave maximum output frequency is up to 60MHz. FY8300S series Three-channel Function / Arbitrary waveform generator is a set of Function Signal Generator, Arbitrary Waveform Generator, Pulse Generator, Analog / Digital modulator, Sweep, Counters and Frequency Meter and other functions in a high Performance, cost-effective, multi-function signal generator. Abundant shortcut keys and graphical user interface simplifies every operation. Users do not have to spend a lot of time to learn and familiar with the operation of the instrument, you can be skilled use. For education, research and development, production, testing, maintenance and other industries to provide a new choice. The instrument adopt the Direct Digital Synthesizer (DDS) technology and provide stable, precise, pure and low distortion signals. Surface mounting technology improves interference immunity and operational life span. Can output up to 97 groups of functions / arbitrary waveform, contains 33 groups of preset waveforms and 64 groups of user-defined waveforms. Preset waveforms: Sine, Square, Rectangle (Duty Cycle adjustable) Pulse (Pulse width and cycle time can be set accurately) Triangle/Ramp, CMOS(0~12V) Four channels TTL, Exponential Rise, Exponential Fall, Noise, ECG, DC etc. Specification: Frequency Model FY8300S-20M FY8300S-40M FY8300S-60M Sine 0~20MHz 0~40MHz 0~60MHz Square 0~20MHz 0~20MHz 0~25MHz Ramp, Triangle 0~10MHz 0~10MHz 0~10MHz Pulse 0~10MHz 0~10MHz 0~10MHz TTL/CMOS 0~10MHz 0~10MHz 0~10MHz Arbitrary Waveform 0~10MHz 0~10MHz 0~10MHz Minimum pulse width 20ns(All models of pulse wave minimum width can reach 20ns) Min. Resolution on all frequency range 1Hz (Min. resolution can reach 1Hz on all frequency range to ensure adjusting accuracy under high frequency. For example, it can output 10.000000000001MHz signal). Accuracy 20ppm Stability 1ppm/ 3hours Waveform Characteristics Waveforms Sine, Square, Rectangle (Duty Cycle adjustable) Pulse (Pulse width and cycle time can be set accurately) Triangle/Ramp, Sawtooth Wave, CMOS, Four channels TTL, DC, Half wave, Full wave, Positive Step, Inverse Step, Positive Exponent, Inverse Exponent, Lorenz Pulse, Multitone, Noise, ECG, Trapezoidal Pulse, Sinc Pulse, Narrow Pulse, Gauss White Noise, AM, FM, and other 64 sets customer-defined waveform. Non-Volatile Storage Can store 64 user-defined arbitrary waveforms, (8K 14bits) * 64 Waveform Length 8192 points * 14bits Sampling Rate 250MSa/s Vertical Resolution 14 bits Sine Harmonic Suppression 50dBc(99% (0.01Hz~10kHz) Output characteristics Amplitude(VPP) Frequency5MHz: 1mVpp~24Vpp; 5MHz 10MHz Frequency>20MHz: 1mVpp~5Vpp; Resolution 1mV Amplitude Stability 0.5%/ 5 Hours Amplitude flatness 2.5%(10MHz); Waveform Output Impedance 5010%(Typical) Protection All channels can work more than 60 seconds when the load is short-circuited. DC Offset Offset Range Frequency20MHz: 12V; Frequency>20MHz: 2.5V; Offset Resolution 1mV Phase Feature Phase range 0~359.99 Phase resolution 0.01 TTL Output TTL Level Amplitude >3Vpp Fan-out >8 TTL LOAD Rise/Fall Time 10ns CMOS Output Low Electric Level >Please Click Here to Download the English User Manual