FTTH Splicing Splice Fiber Optic Stripping Tool Kits With Fiber Cleaver FC-6S

Specifications Type Fiber Cleaver FC 6SFiber diameter 125umCoating diameter 250um 900umTypical splitter angle 0 5 degreesAdjust the peeling length is 5 20mmLength of the slit 9 16mm 10 16mmBlade Lifetime 36 000 columns 3 000 per blade position Features 1 CFS 2 Fiber Stripper 250 um coated layer of 125 um fiber with A Opening the top of the B 1 98mm can be used for stripping fiber outer sheath The open hole of the type V and 140 um on the edge of the Clamp can be used to strip the 250 um layer of 125 um fiber Jaw factory has been adjusted shall not be adjusted Will not damage the fiber All the cutting cross section has precise mechanical tolerances to ensure a clean and smooth operation According to the handle ergonomic design comfort grip Does not use the blade locked in a closed state 2 Wire Stripper The use of temperature is 20C 50 C Factory pre set no need to adjust this stripper again to prevent fiber scratch cutting blade precision positioning quenching and tempering treatment anti rust primer If not use set the blade lock in the closed state For stripping 250 micron buffer coating to expose 125 micron cladded fiber Second hole for stripping 2 3mm fiber jackets 140 m diameter hole and V opening in blade allows removal of 250 micron buffer coating from 125 micron fiber Pre set at the factory no adjustments needed Will not scratch or nick glass fiber All stripping surfaces are manufactured to precise tolerances to assur