F3 EVO Cleanflight Flight Controller for Multirotor Racing w/ 4G MicroSD

F3 EVO Cleanflight Flight Controller for Multirotor Racing w/ 4G MicroSD Operations Tutorial: http://files.banggood.com/2016/08/Produce.mpg Specification: Item name: F3 EVO Flight Controller Weight: 5 grams 36x36mm board with 30.5mm mounting holes STM32F303 CPU, 72Mhz inc FPU MicroSD card slot (SD/SDHC, upto 32GB) MPU9250 accelerometer/gyro/compass (connected via SPI) BMP280 barometer 1 IR LED and unique code for race transponder MicroUSB socket for configuration and ESC programming 3 LEDs for 5V, 3V and STATUS (Green, Blue, Red) Supplied with straight and right-angled pin headers Copper-etched Cleanflight logo 8x 3pin though-holes for pin headers for ESC/Servo connections 1x 2pin though-holes for pin headers for UART1 RX/TX 1x 6pin though-holes for pin headers for UART2/PPM/Telemetry/LiPo (for standard SerialRX/SBus/PPM lead) 1x 4pin though-holes for pin headers for UART3 1x 6pin though-holes for pin headers for IR LED/LED Strip, RSSI, Current Monitoring, and Buzzer connections 1x 3pin though-holes for JST-ZH connector for Spektrum Satellite receivers (connector supplied). 1x 4pin top mounted, JST-SH socket for I2C 1x 4pin top mounted, JST-SH socket for UART2/PPM 1x 4pin bottom mounted JST-SH socket for SWD debugging 1x 2pin though-holes for BOOT jumper Feature: 1. Sonar Sonar support for precision low-altitude hold. 2. Buzzer Buzzer port for audible warnings and notifications. 3. I2C Port I2C port always powered, perfect for external sensors or always-on OLED Screen. 4. OneShot ESC Full support for OneShot ESCs for easy PID tuning and a sharper response. 5. Battery Monitoring Built in battery voltage monitoring, input for additional current monitoring. 6. Developer Friendly Developer friendly debugging port (SWD) and boot mode selection, unbrickable bootloader. 7. Dedicated ports for PPM/SBus/SumH/etc for easy connections. Socket for plug and play Spektrum Satellite receiver. 8. Programmable LEDs Output for multi-colored LED strips - great for FPV racing, line-of-sight flying orientation and night flying. 9. Jaw-Dropping Flight Performance The F3EVO uses advanced processor, sensor and software technologies to make your aircraft fly like it's on rails. The F3EVO flight-controller and the Cleanflight software enables the precision flying you need for fast FPV racing. 10. Next-Generation CPU The F3EVO has an ARM Cortex-M4 72Mhz CPU with Math co-processor (FPU) for efficient flight calculations that gets more done in less time.Loop times up to ~2x as fast as previous-generation STM32F1 based boards. 11. SPI sensor connection The gyroscope and accelerometer sensors are connected to the fast SPI bus. This enables the software to get more data even quicker to help stabilize your aircraft even better 12. Race Timing Transponder The F3EVO features a race transponder system for recording your lap times. Each board comes with a special transponder code to identify you at race events. Compatible with i-LAP receiver systems. 13. MicroSD The F3EVO is the first and only standard sized board for Cleanflight that features a MicroSD card socket for logging. Supports MicroSD/SDHC up to 32GB - just leave one in and log every flight. 14. USB USB socket to configuration of flight controller and for pass-though configuration of BlHeli ESCs. USB socket is not shared with any of the 3 serial ports. No more unplugging your OSD when configuring 15. Configurable The F3EVO runs Cleanflight which can be configured to suit your needs using a cross-platform GUI (Windows/OSX/Linux). 16. Small and lightweight The F3EVO has a standard 36x36mm form-factor with 30.5mm mounting holes on a thick PCB for durability. 17. Stackable The F3EVO is a stackable design. Connect an OSD or PDB directly under the board for a super-tidy and wire-free installation. Stackable designs are proven to be more durable in a crash. 18. Broad RC receiver support Supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM. No external inverters required (built-in) receiver powered via flight battery or USB for easy configuration. 19. Cleanflight logos and stickers The F3EVO features a copper-etched Cleanflight logo so you can show your support. Each purchase direct from the Seriously Pro shop also comes with stickers. (when available) 20. GPS Ready With a full-set of sensors (Accelerometer, Gryoscope, Compass and Barometer) each F3EVO is capable of GPS Navigation Available in Cleanflight soon, New GPS features under active development. CleanFlight Software Features: The F3 runs Cleanflight and is configured using the Cleanflight Configurator. It has a stack of great features, such as these: 1. 3 primary flight modes: Acrobatic, Angle and Horizon 2. Extensive control and switch configuration 3. Telemetry Support (HoTT, FrSky, SmartPort, etc) 4. Battery Monitoring and Warnings 5. Signal Strength Monitoring (RSSI) 6. Failsafe system 7. Altitude Hold Mode 8. Heading Hold Mode 9. In-flight tuning 10. Customizable LED colors 11. Android phone support (via EZ-GUI GCS) Package included: 1 x F3 EVO Flight Controller 1 x MicroSD card socket and pin headers 1 x Micro SD card 4G