Electro-Harmonix Tri Parallel Mixer - FX Loop Mixer/Switcher

A powerful effects creation and mixing hub with flexible controls for multiple configurations!

The EHX TriParallel Mixer is a powerful effects creation and mixing hub with three separate FX loops and flexible controls allow for multiple configurations.

The Tri Parallel Mixer is surprisingly compact considering the level of functionality it provides, while its intuitive controls and I/O make it easy to operate.

Use it to switch between or mix up to three separate effects loops. Send a guitar or other instrument out to three separate amplifiers, or input three separate instruments to switch between or mix to a single output. Mix effects in parallel to create sounds and allow for options not possible when using effects in series (one after another).
Rtn 1/2/3 Jack
This jack is the input for a given channel.
Send 1/2/3 Jack
Outputs the signal inputted when its channel is active.
Return Knob
Sets the level of the signal received at the RTN jack before it is sent to the output.
Send Knob
This knob sets the level outputted to the SEND jack.
EQ
This knob affects the tonal characteristic of the signal inputted to the RTN jack.
Phase
Inverts the phase of the signal sent out of the SEND jack.
Master Volume
Sets the master output level of the mixer.
Dry Vol
Sets how much dry signal is sent to the output.
Output Jack
The master output.
Input Jack
The signal present here will be outputted to an active channel's SEND jack. In master bypass, the input signal connects directly to the OUTPUT jack.
Ch 1/2/3 Footswitch
This switch is used to activate/deactivate a given channel. Double tap any of these switches to enter bypass mode.