Eachine Tiny 32bits F3 Brushed Flight Control Board Based On SP RACING F3 EVO For Micro FPV Frame

Eachine Tiny 32bits F3 Brushed Flight Control Board Based On SP RACING F3 EVO For Micro FPV FrameDescription Brand Name EachineItem Name Tiny SP RACING F3 EVO BRUSH flight controllerDimension 23mm 19 5mm 5mmThickness 1 2mmWeight 2gFeatures 1 F3 EVO Brush is in the revision on the basis ofthe F3 EVO SP RACING it is a 32bits brush flight controller based on SP RACING F3 EVO firmware 2 The flight control support 1S 4 2V 3 Independent design of the circuit structure comes with the Voltage control technology 1S lipo battery input the UART1 2 3 output 5V DSM port output 3 3V 4 Using STM32F303CCT6 MPU6500 advanced hardware platform F3 guarantee more stable flight 5 With a large current NMOS transistors operating current of up to 10A or more Each Brushed motor is equipped with freewheeling diodes 6 Support for PPM SBUS DSM DSM2 DSMX receiver input signal 7 In support of the world almost all hollow cup motor including 1020 coreless motor Notice This Tiny F3 EVO Brush flight controller is only use for BRUSH MOTOR Not compatible for BRUSHLESS MOTOR Receiver configuration 1 DSM receiver soldered directly to the DSM interface 3 3V GND RX3 Enable Seria RX for UART3 and Set Receiver mode RX SERIAL Select Spektrum1024 DSM DSM2 or Spektrum2048 DSMX in Cleanflight configurator 2 SBUS receiver welded to the UART2 GND 5V RX2 Then Enable Seria RX and Set Receiver mode RX SERIAL Select Sbus signal in Cleanflight configurator 3 PPM receiver welded to th