EWRF e7082VM 5.8G 40CH 100mW Power Adjustable FPV Transmitter W/ Betaflight Cleanflight OSD

EWRF e7082VM 5.8G 40CH 100mW Power Adjustable FPV Transmitter W/ Betaflight Cleanflight OSDDescription:Item number:EWRF e7082VMFrequency: 5.8G 40CHTransmitting Power:100mw/OFF(Pitmode)Power supply:DC5VCurrent(5v):170mA(100mW)Weight: 1.4gStandard size: 14*15*3mmMain Features:* Betaflight/Cleanflight OSD configuring parameter* Clean powerup and channel switching without interference to others* Smaller current: 100mw(5V power supply: 170mA)User Guide1. LED indication* The red LED indicates the state of working mode or the item when setting the VTX(flashing 1 time means selecting the channels, flashing 2 times means selecting the bands).* The blue LED indicates the state of Pitmode or the value of item when setting the VTX ( e.g. when selecting the channels, 1 times of flashing means channel 3. When selecting the bands, 1 times of flashing means band A.)* The green LED flashing indicates that the VTX overheat protection is working, the power level will go down.2. Working mode indication* After powering up, the redblue LEDs will signal the following two items of VTX in turn: channel, band (the flashing times of the red and blue LEDs indicate the item and the value respectively). After that, the LEDs indicate the working modes.* Normal: The redblue LED are on.* Pitmode:The red LED is on and blue LED is off.3. Setting* The red LED flash 1 time which means the item of channel selecting, then press the button can select the channels(blue LED flashing times corresponds to the chann