ESTINK Digital Humidity Controller Module LED Hygrometer Sensor Control Switch 0~99% RH XH‑W3005 24V Digital Humidity Controller Humidity Controller

Feature: 1. The ABS flame retardant shell is and environmentally friendly possess high anti aging sturdy and durable 2. The LED indicator shows the current output status the digital display tube shows the measured humidity 3. Easy to operate two buttons of up and down easy to set up and operate very convenient to use 4. Load power for 240W maximum load current is 10A support direct output powerful and practical 5. Humidity measurement range from 0%-99%RH accuracy for 0.1%RH accurate and useful Specification: Item Type: Digital Humidity Controller Model: XH-W3005 Input Voltage: DC24v Load Power: 240W Maximum Load Current: 10A Output Type: Direct output Installation Hole Distance: Approx. 73mm / 2.9in Accuracy: 0.1%RH Humidity Measurement Range: 0%-99%RH Package List: 1 x Digital Humidity Controller Note: The product is a direct output so when the output terminal is not connected or not connected please do not turn on the power to prevent the two stage contact of the wire from sparking and accidental touching causing unnecessary trouble. How to use: Connect the thermostat to the circuit turn on the power and the digital tube displays the current humidity 1. Set the Starting Temperature: Press the up button to display the start humidity long press the up button for about 3 seconds the start humidity number flashes and can be set by the up and down keys 2. Set Stop Humidity: Press the down button to display the stop humidity long press and hold the down button for about 3 seconds to stop the flashing of the humidity number which can be set by the up and down keys 3. Restore Factory Settings: In the power on state press the up and down keys at the same time the digital tube will display 888 and then automatically jump to the value to detect the humidity that is restore the factory settings