Digital Sat Satellite Signal Finder Meter Strength DIRECTV DISH TV

Description Digital Sat Satellite Signal Finder Meter Strength DIRECTV DISH TVThis digital sat is microprocessor controlled and thus reliable and accurate The digital sat Finder is very sensitive and can detect the lowest signals the strong signals strong satellite large plants can for a better Through optimal adjustment interference can be prevented by weather conditions Ideal for satellite installation in the home and mobile equipment caravan camping boat Specification 1 Input frequency 950 2150 MHz2 Min input level 40dBm3 Maximum input level 10dBm4 Input impedance 75 Ohm F connector5 Output impedance 75 Ohm F Connenctor6 Betriebgsbereich 52 60dB7 Power supply DC 13 18V8 Dimensions 108 x 60 x 44 mmWorking process 1 Switch the receiver on The digital sat turns on automatically 2 Roughly align your incorrect on the desired satellite 3 The SAT has a variety of signal strength 0 display critical point 4 Move the dish slightly vertically and horizontally The higher the scale value of Satfinders the better the satellite signal The scale indicates the highest value you can classify the signal into a smaller level button with the ATT Repeat the move of the dish until the maximum value is shown again and a highest buzzer sounds 5 Check you have found on your TV device whether the right satellite 6 Remove the cables on the sat and again connect the LNB to the receiver Notes To avoid the full beating out the needle you put the SAT