Digital Display Panel Anti-interference Current Meter Measurement

Digital Display Panel Anti-interference Current Meter Measurement Specification: Features: 1. product stability high measurement accuracy and strong anti-interference ability. 2. The appearance is standard size and easy to install. 3. The power supply uses polarity protection lines. 4. LED digital display the reading is more convenient. 5. It is the perfect instrument for testing current. Specifications: Condition:100% Material: Plastic Color: Blue 100A full scale: plus or minus 100.00 resolution 0.01A Working voltage: +5V±5% Working current: 1 milliohm Measurement rate: Greater than or equal to 2 / S Decimal point position selectable Can be calibrated by potentiometer SMT process Overrange display: display H Extreme working conditions: Working voltage: +5V±5% Working temperature: -10 ~ +50 degrees Celsius Working humidity: 10~80% no condensation Working pressure: 80 ~ 106kPa Sunlight: No direct illumination Package List: 1xHost 1xTest Cable Note: This header does not include a shunt. If you need to add the range of the shunt please take another shunt. For customers with shunts please note your shunt specifications 75mV as standard. This meter adopts the common ground design that is the IN- of the test end is connected to the negative pole of the power supply end so the ammeter can only be stringed between the load negative and the negative power supply. It is recommended to use separate power supply. Four and a half that is the last four digits are all numbers 0~9 the first digit can only be 1 or -1 so and so on such as 20A: 19.999 50A: 50.00 100A: 100.00 200A: 199.99...... ...... Tables above 10A must be added with a shunt to work. If you buy 20A or 50A/100A even if you test 0.1A you must add a shunt to work.