DasMikro Das87 Spektrum DSM2 7CH PPM Transmitter RC Parts

Description Das87 DSM2 7CH PPM Transmitter is an AR6100 type receiver reprogrammed to be a DSM2 compatible short range transmitter It is intended to be used as a 7ch TX module with an older transmitter or any DIY RC project with PPM signal out The TX accept idle high and low normal and inverted PPM Features Das87 DSM2 7CH PPM Transmitter is a DSM2 compatible transmitter module intended to convert traditional joystick transmitters to 2 4GHz It is a DIY solution requiring some understanding of electronics and soldering It may require a voltage regulator and Zener diode to control voltages from the host transmitter The host transmitter can have 2 to 12 channels The first 7 PPM pulses will be transmitted To use as a module you will need a 3 3 or 5v regulator if it is to be powered from 2S or 3S Lipo Some PPM signals exceed 3 6v so you may need a 3 3v Zener diode and 1000 ohm resistor to limit the voltage SpecificationThe TX moudle can be powered by 3 2 10vThe PPM input to the signal Pin7 must be 2 1v to 3 6v max when highThe PPM input must be below 0 8v when lowPin7 floats needs active strong highs and lowsThe PPM signal can idle high or lowUser manual please click here Bind 1 Switch the Rx on in bind mode 2 Put bind plug on Tx1 Pin1 3 Switch Tx1 on 4 Wait for Tx and Rx led to stop flashing Package Included 1 x DSM2 7CH PPM Transmitter1X Bind Cable