DasMikro DSMX/DSM2 2.4G 6CH RC Micro Receiver

Description: Item Name: DSMX/DSM2 6CH Nano RC Receiver Channels: 6 channels Power: 3-10V DC Antenna Length: 30mm Product Size: 9.9mm*9.2mm*2.5mm Product Weight: 0.3g Package Included: 1 x DSMX/DSM2 6CH Nano Receiver Signal Output: CH1 - CH6 output normal servo signal GENERAL: 3-10v may be connected with correct orientation to +/- points. The Rx is not insulated so take care to avoid short circuits. The PCB is thin so do not bend it or exert great force on it. LED STATUS: Led On = perfect reception (real-time indicator). 1 flash = Scanning (~2sec between flashes; wrong model if never stops). 2 flash = Brownout (receiver voltage went too low; check battery/servo load) FAILSAFE: Outputs are not driven (do nothing) on startup and while scanning. Outputs 'hold' on short signal losses (1s). BINDING: 1. Switch Rx on and wait ~20s until led flickers fast. 2. Switch Tx on in bind mode and Rx led should flash slowly and then go solid. 3. Change distance between Tx/Rx if binding does not work. SERVO OUTPUTS: Pads 1-6 will normally be used for servos