DIY Sine Wave Generator Kit Simulation Skill Test 511 DIY Electronic Production Parts

Feature Board size 55 28mmPower supply voltage AC12VNote 1 Before power on check the circuit board to eliminate possible faults 2 Function realization When 12V AC is connected to JP1 monitor the waveform of TP1 with an oscilloscope carefully adjust RP1 so that TP1 can just have a sine wave signal of amplitude If the circuit cannot achieve the function please carefully detect and debug the circuit to achieve Corresponding function 3 Turn on the power measure the static parameters according to the requirements of Table 1 and record the measurement results 4 Measure the dynamic parameters of the circuit according to the requirements of Table 1 record the measurement results and draw the waveform diagram as required 5 This is an unassembled kit you need to solder it Package includes 1 x DIY KIT