DC5-15V 150W ZVS Heating Board Inductive Flyback Heating Driver Ignition Coil Inductive Heater

brand new and high quality. Features: 1. This is a non-tap mini ZVS finished board excluding heating coil transformer cooling fan etc. 2. The maximum power is 150W (15V induction heating). Push the transformer 12V the primary 5+5 turns about 30W. 3. Input voltage for DC 5V~15V this voltage range is the voltage at work not the voltage when the power supply is empty! (The voltage exceeds 15V or below 5V. We do not make sure that it can work normally.) 4. Make sure that all components are soldered correctly the positive and negative poles of the power cord are not reversely connected after the load is connected (heating coil transformer) and then power on! Can not power on at no load which makes it easily broken. 5. When inductive heating usually work for 5 minutes to power off cooling. Because the current is relatively large during induction heating the coil heat is also relatively large. When heating part of the heat generated by the heated object is transmitted to the heating coil. For a long for time the temperature of the heating coil is high. If the heating coil is connected to the terminal the plastic part of the terminal will melt! Therefore it is best to solder the heating coil directly to the PCB during induction heating. Please pay attention to this point. Specifications: Input Voltage: for DC 5-15V Maximum Power: 150W Material: Metal and Plastic Size: approx.38x55mm/1.5x2.17in Color: As pictures shown Quantity: 1 Set Note: No retail package. Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors the picture may not reflect the actual color of the item. Thank you! Package Includes: 1 x Module 1 x Coil (other accessories demo in the picture is not included.)