DC 3A 30W 4A Max Auto Step up/down adjustable CV Regulator Power Supply Board

Introduction: wide voltage input 5.5-30V wide voltage output 0.5-30V both Step up can also Step down such as you adjust the output voltage of 18V then the input voltage between 5.5-30V casually change will be constant output 18V; then For example you enter 12V adjust the potentiometer settings 0.5-30V arbitrary output. High power high efficiency better performance than XL6009 / LM2577 program. Using external 60V75A high power MOS parallel high current high withstand voltage Schottky diode SS56. Not 6009 or 2577 program SS34 can be compared because according to the principle of step-up and down MOS and Schottky s pressure is greater than the sum of the input and output voltage. Iron silico aluminum magnetic ring inductance high efficiency. Specifications: Input Voltage: 5.5V-30V Output Voltage: 0.5V-30V Adjustable Output Current: to long-term stability in the 3A to strengthen the heat can reach 4A Output Power: Natural Cooling 30W Strengthen the Heat 50W Conversion efficiency: 88% Short circuit protection: Yes Operating frequency: 180KHZ Size: 56x20x21mm/2.2x0.79x0.83 (LxWxH) Weight: 17g Precautions: 1. This module is a constant pressure type is not recommended for battery charging or LED drive and other occasions need constant current constant current occasions can buy our constant pressure constant current automatic Step down module. 2. Make sure that the power of the power supply is always greater than the power required for the output load! 3. Module input No input anti-reverse function please pay attention to the direction of power supply positive and negative. 4. Input voltage to 7V or more the module can the maximum power output. When the input voltage is 5.5V the output power is about 15W. 5. Module with output short circuit protection short circuit protection module automatically shut down the output to re-power the module can be restored if your power supply without output current limit protection it is recommended in the module input front-end fuse improve safety factor. 6. The module has input undervoltage protection function the default is about 5V below this value it will automatically disconnect the output to re-power the module can be restored (note that the module port voltage when the input current is relatively large Do not ignore the input voltage on the wire). Package Include: 1 x Automatic Step up/down Converter