Closed Loop Motor Stepper Integrated Digital for Robots Cutting Marking CNC Router Engraving Machine JSS57P2N

Features: 1. Adopt advanced 32-bit motor control dedicated chip andvector closed-loop control technology 2. The default work is in closed loop mode no loss of step and it also supports working in open loop mode. 3. Increase the output torqueand running speed of the motor 4. The current level is intelligently adjusted according to the load reducing the temperature rise of the motor locking the current and adjusting the closed-loop p.k. current. 5. Adapt to various mechanical load conditions(including low-rigidity loads such as pulleys and pulleys) without adjusting the gain parameters 6.The position command smoothing filter can be set the motor runs smoother the vibration is lighter and the acceleration and deceleration dynamicper formance is improved. 7. Zero-speedstatic capability without vibration after positioning 8. Support single and double pulse input pulse response frequency up to200KHZ 8. Support 15 fixed subdivisions and support software to set any subdivision (200~65535) 9. Support modbus RTU protocolon position and speed control controlled by communication 10. Support monitoring of motor operating conditions including speed position deviation busvoltage operating current etc Specification: Power supply: DC36V Recommended power supply DC36V Output current: 6.0A(current varies with load) Logic input current: 10mA7~16mA recommended 10mA Pulse frequency: 0~200KHz Encoder line number: 1000 Insulation resistance: no less than 500MΩ Environment Temperature : 0-40 degree Celsius Humidity: 40~90%RH Storagetemperature: -20-80 degree Celsius Package Includes: 1x Motor Stepper 1x box 1x manual