Catda Raspberry Pi PoE HAT 5V Active Power Over Ethernet HAT with Heatsink for Raspberry Pi 4 Model B/3B+

Features This PoE World device provides an efficient solution for delivering power to a Raspberry Pi 3B or 4 over 328ft of network cable This device allows power to be carried on 10 100 1000 networks with either 802 3af or passive injectors and switches with a CAT5e CAT6 or CAT7 Ethernet network cable Intended for use with similar PoE switches this active PoE solution negotiates with the switch to activate power and provide it to the Pi It is a compact and cost effective power solution This PoE to 5 volt converter allows you to operate the Pi up to 328ft or 100 meters from a power source The form factor is ideal for a Pi case especially the CanaKit Premium case The connector pins are available for GPIO and serial use There is room for a large heat sink and the output power is completely regulated and stable with much less noise than the Raspberry Pi hat Specifications Power and data source input RJ 45 female connectoron Pi3 B or Pi4Data to powered device All 4 pairs are active for data at 10 100 1000Power input Pins 802 3af mode A or mode B 12 and 36 either polarity 45 plus 78 minus802 3af class Class 3 12 95 watts maxInput Voltage Range From 44 to 57 volts Active POE Input Current at 48v 265 ma input delivers 2 amps outOutput Voltage Max load 5v10w 5v±2 at 2 amps 10 wattsOperating Temperature 0°C 50°CSize 65 x 39 x 11 mm height from top of Pi pins Isolation Not isolatedPackage includes 1 x PoE HAT1 x Heats