CUAV V5 NANO Flight Controller for PX4 PIX FPV Drone Multi-rotors VTOL UAV Fixed Wing

Specifications Hardware Parameters Main FMU Processor STM32F765 32 bit 216MHz 2MB flash 512KB RAM Features Compact but powerful V5 nano flight controller NEO GPS Support for hardware on open source platform PX4 and Autopilot Suitable for fixed wing drones helicopters multicopters FPVs VTOL Unmanned Boats UAVs High Performance Equipped with STM32F765 microprocessor features 216MHz main frequency 2M flash and 512K SDRAM There are four groups of isolation chips and a MS5611 high precision air gauge Easy to install and dismantle with 2 6mm spacing between IO pins Real time Data Monitor Five groups of built in sensors enhance its safety and stable performance There are ICM 20689 accelerometer and gyroscope ICM 20602 accelerometer and gyroscope BMI055 accelerometer and gyroscope IST8310 magnetic compass and MS5611 air gauge Sensors Accelerometer ICM 20602 ICM 20689 BMI055 Gyroscope ICM 20602 ICM 20689 BMI055 Magnetometer IST8310 Air Gauge MS5611Interfaces UART Ports 5 I2C Ports 4 PWM Output Up to 11 PWM Input 4 Signal Input Protocol for Remote Control PPM SBUS DSM RC IN 1 PPM IN 1 RSSI Input PWM or 3 3V analog voltage CAN Standard Bus 2 CurrentVoltage Input 1 Safety Switch 1 GPS Port 1 Debug Port 1 JATG Port 1 USB Port 1 Type C Supported Models For PX4 Hardware Fixed wing Aircrafts 3 8 Multicopters Helicopters VTOL UAVs Unmanned Boats Working ConditionsPhysical Parameters PM Working Voltage