CM621 2.4G 6CH Microlite DSM2 Compatible Full-Range Receiver For Radio Transmitter

REDCON 2 4G 6CH Microlite DSM2 Full Range Compatible Receiver CM621Description Brand Name REDCONItem Name CM621 receiverBand 2 4GHzChannel 6Modulation DSM2Dimensions W x Lx H 19 x40x9mmWeight 4 4gVoltage Range 4 10vBrown Out Voltage 4 0v Always supply power above this voltage Antenna Length Main RX 30mmExpected Range 400m tested with JR DSX9 Compatibility Spektrum and JR DSM2 DX6I DX7 DX8 DSX7 DSX9 DSX11Features Patent pending Model Match prevents flying a model using the wrongmodel memory feature does not work with module systems Servo Sync feature does not work with module systems Preset failsafe system Quick ConnectHorizontal Pin configurationRed LED indicates number of holdBinding Procedure 1 Put the binding harness into connector location marked BATT Next apply power to the receiver Receiver LED should illuminate it means bind is accomplished2 To set fail safe throttle and control surface positions minimum throttle and all control surfaces set to neutral is suggested Press and hold the bind button of transmitter LED will illuminate Turn on the transmitter 3 Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of receiver will illuminate solid All fail safes should be programed correctly now 4 Remove binding harness from the BATT channel Restart the receiver by cycling it power off and turn on and connect battery into BATT channel is recommended All channels shou