Auralex D36-DST Roominator Kit, 18x DST-112 & 18x DST-114 Panels (Charcoal Gray)

Roominator-DST Kits span a wide variety of applications, addressing the acoustic and aesthetic needs of the small project studio as well as the most demanding professional mix/mastering environments. Whether it's your first studio, a home theater, or a Pro Tools Suite, the Roominators-DST Kits are designed to dramatically improve your acoustics, and give you a great designer look! Now you can have the expertise, features, and performance that you have come to expect from Auralex!Perfect for spot treatment and that designer look. The Roominators D36 acoustic sound control kit offers you a starting point to reduce unwanted slap and flutter echo in your room. Think of all the creative possibilities these kits afford you as you begin to tune your room.Technical DetailsThe D36 contains:• (18) Charcoal Gray DST-112 panels• (18) DST-114 panels (In your choice of 3 colors: Charcoal Gray, Purple, or Burgundy)• Mounting AdhesivePerfect for vocal booths, isolation rooms, or small spaces with dimensions of approximately 6' x 8' x 8'Installation- DST Panels -DST-112 & DST-114 panels reduce mid-high frequency reflections, flutter echo, room ring and excessive reverberation. To maximize performance in a project studio or control room, consider placing the panels at the first reflection points located to the sides, front, rear and ceiling above your listening position. To maximize performance in a live room, consider spacing the panels evenly throughout the room and staggering treatment across parallel surfaces.- EZ-Stick Pro Tabs -Clean attachment points on the wall surface with Isopropyl alcohol (avoid household cleaners), wipe gently and let dry. Separate the EZ-Stick Pro Tabs from each other. Remove one of the paper release liners from the strip. Apply the tabs on the rear of the panel near the outside edges with heavy, uniform pressure (heel of hand). Orient vertically for maximum holding strength. Remove the second paper release liner from the backside of the tab, position the panel with the target location on the wall and press firmly to attach. Use 4 tabs for a 2' x 2' Studiofoam panel and 6 tabs for a 2' x 4' panel.