Audio Developments AD071 Camera Mixer with Tripod Fixing & Mount Kit, 3 Mic/Line

The Audio Developments AD071 Camera Mixer with Tripod Fixing and Slide Mount Kit (3x Mic/Line Inputs) is an ideal solution for field mixing, boom pole operation and camera mounted applications. Its portable yet rugged chassis features a single balanced line and microphone level switchable XLR connector. The output section features a pair of balanced XLRs that are also microphone and line level switchable. The mixer is capable of producing 48V phantom power for condenser microphones and its built in limiter maintains distortion from peaking audio signals. The AD071 may be powered via an external power supply or optional PP3 9V battery pack. This kit includes a Giottos M621 camera slide mount which is equipped with a camera plate that slides back and forth for macro positioning and features a safety button that limits the sliding on the quick release. Mic Inputs One electronically balanced XLR connector with 48V phantom power, high-pass filter, gain control and mic or line input selection. Line Inputs Electronically balanced with gain/level control. Routing Each input features left and right routing toggle switches. Outputs Balanced XLR type connectors and stereo rotary level control. Microphone and line level switchable. A secondary 1/8" (3.5mm) mini output carries microphone level signal. Limiters A push-button switch introduces the output limiters into circuit and two LEDs indicate the onset of limiting. Line-up Oscillator 1kHz tone injected into outputs. Monitoring 1/8" (3.5mm) headphone output jack with a push-button switch selecting the direct or return signals. The return signals are brought in on a 1/8" (3.5mm) stereo jack. Metering Two LED ladders indicate output level. Powering Either external power, via a 4 pin Hirose connector or a separate PP3 9V battery pack can be used to power the mixer. An LED indicates power present and flashes when the voltage is too low.