Arduino with Integrated Drivers Built-in Strip Light Stick WS2812 RGB LEDs 8 Bit Channel 5050 LED

Label:Yes Wattage:0.7W The control circuit and the LED share the only power source. Send data at speeds of 800Kbps. Cascading port transmission signal by single line. Voltage:DC4-7V Application: Full-color module, Full color soft lights a lamp strip, LED decorative lighting, Indoor/outdoor LED video irregular screen What you will get: 10 X WS2812 5050 RGB LED Module Intelligent reverse connect protection, the power supply reverse connection does not damage the IC. Control circuit and RGB chip are integrated in a package of 5050 components, form a complete control of pixel point. Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not accumulate. Built-in electric reset circuit and power lost reset circuit. Each pixel of the three primary color can achieve 256 brightness display, completed 16777216 color full color display, and scan frequency not less than 400Hz/s. Any two point the distance more than 5m transmission signal without any increase circuit. When the refresh rate is 30fps, cascade number are not less than1024 points. The color of the light were highly consistent, cost-effective. Applications: Full-color module, Full color soft lights a lamp strip LED decorative lighting, Indoor/outdoor LED video irregular screen Package Included: 10 X WS2812 5050 RGB LED Module Notice: 1. The real color of the item may be slightly different from the pictures shown on the website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data. Thank for your understanding. 3. 1cm=0.39 .