Arduino WiFi Control Kit with Arduino UNO R3 Board + Motor Drive Shield Board + WiFi Module + Dupont Line for Smart Robot Car

Descriptions: - The kit is equipped with a UNO control panel and a driver board as main controls in the chassis of the vehicle, plus a DT-06WiFi transparent transmission module so that the movement of the vehicle can be controlled through the WiFi signal using the mobile phone APP. - Suitable for all T-series tank cars in our shop. Specifications: More details, please visit: https://github.com/SmartArduino/SZDOITWiKi/wiki Upgrade Parts/Accessories: Frame For Vehicle Type: Tank Material: Plastic About the Arduino Uno Development Kit: Simultaneous control of 2 motor and 16 servos; Use bluetooth (reserved line interface) or WiFi control; Using a stack insert design. - Power connection method: Open circuit VM and VIN, (separate control motor, 6~36V); Open circuit VS and VIN (control servo independently, 6 to 18V); Short the VM and VIN while shorting VS and 5V. At the same time control the motor (6 ~ 18V) and 16 5V servos About the DT-06 Wifi Moudle: Supply voltage: 4.5V~6.0V, TTL voltage: 3.3V (5.0V compatible) Support baud rate (bps): 300/600/1200/2400/4800/9600/19200/38400/57600/74800/115200/230400/460800/921600/1843200/3686400; Operating temperature range: -40C-125C WiFi supports AP, STA, AP+STA three modes Supports reprogrammable, OTA firmware upgrades Supports serial AT commands Package List: 1 x Arduino UNO R3 Board 1 x Motor Drive Shield Board 1 x DT-06 WiFi Module 1 x Dupont Line 1 x USB cable 1 x 18650 battery box 1 set of copper pillars The source about UNO bluetooth wifi car for your reference. Please click () here.